• Unit installation height - up to 3.5 m;
• Condensate lift increased to 700 mm with a new drain pump;
• Removable washable grille;
• Low-noise cross-flow fan reduces turbulence in the duct, thereby reducing noise levels;
• The device for uniform and gentle air supply, as well as advanced air flow control technology, makes the air temperature uniform at all points in the room, creating more comfortable conditions;
• High installation flexibility is achieved through various connection options;
• Durable, washable filter

• 

  
  

• Slim format (215 mm);
• Vertical cold air supply from the top of the unit;
• Warm air supply along the floor from the bottom of the unit;
• Multi-speed fan;
• Removable grille and durable filter.

1. Modernized design with built-in TRV for rooms without suspended ceilings;

2. When starting in heating mode, an intelligent function is activated to prevent cold air from being supplied. The unit will only start supplying air after the indoor unit's heat exchanger has warmed up;
3. Automatic vertical louver swing. When cooling, cold air is directed to the upper part of the room and then descends. When heating, warm air is directed to the lower part of the room and then rises;
4. Self-cleaning (in COOLING and DEHUMIDIFYING modes). After the indoor unit is turned off, the fan continues to operate at low speed, ensuring ventilation and dehumidification of the internal surfaces of the air conditioner and preventing the appearance of mold and unpleasant odors.
5. Improved fan. High efficiency with low noise levels.
6. Triple purification filter with electrostatic dust retention, anti-fungal, and anti-bacterial properties.
7. The front grille is easily removable for cleaning.

• Capacity to connect up to 100 indoor units
• Increased power range from 22.4 to 68 kW
• Distributed remote central control system
• Control via protocols: modbus\KNS\BACNET\modbus mini
• Intelligent billing system
• New type of compressor that increases cooling capacity by 10% and heating capacity by 30%
• Dual EEV enthalpy control
• Multiple EEV flow control technology
• Improved heat exchanger with 8% increased heat exchange
• Increased operating range: -30℃-52℃
• 5dB(A) reduction in compressor noise thanks to insulation

Coordinates the operation of modes between external and internal units

Heating water for heating systems and hot water supply

 • By adopting advanced photovoltaic direct-driven technology, the system can achieve power generation by utilizing solar power while consuming electricity and ensure utilization of photovoltaic power in priority; 

 • Compared with traditional photovoltaic system, energy wastage during multiple commutation of alternating current and direct current is eliminated, with energy efficiency improved by 6 % - 8 % and photovoltaic utilization ratio up to 99 %;

 • Besides, the innovative MPPT (Maximum Power Point Tracking) technology can track and control the maximum power point status of photovoltaic power generation, so as to achieve maximum utilization of photovoltaic power

A kit for connecting ventilation units with direct cooling heat exchangers to external CHV units.